background image

 
 
 
 

TABLE OF CONTENTS 

 

BEFORE YOU BEGIN......................................................................................  1 
IMPORTANT SAFETY NOTICES..................................................................... 2 
HARDWARE IDENTIFIER.....….......................................................................  3 
ASSEMBLY INSTRUCTIONS........................................................................... 4 
EXPLODED DIAGRAM……………………………………………………………... 8 
PARTS LIST………………………………………………………………………..  9 
WARRANTY.................................................................................................… 10 
ORDERING PARTS.........................................................................................  10

 

 
 

 
 
 
 
 
BEFORE  YOU  BEGIN 

 

Thank you for selecting the IRON GRIP SPORT IGS-09 Olympic Bench 
by IMPEX FITNESS PRODUCTS.  For your safety and benefit, read this 
manual carefully before using the machine.   As a manufacturer, we are 
committed to provide you complete customer satisfaction.  If you have 
any questions, or find there are missing or damaged parts, we guarantee 
you complete satisfaction through direct assistance from our factory.  To 
avoid unnecessary delays, 

please call our  TOLL-FREE customer 

service number.  

Our Customer Service Agents will provide immediate 

assistance to you. 

 

 

 

Toll-Free Customer Service Number       

1-800-999-8899 

Mon. - Fri. 9 a.m. - 5 p.m.  PST 

www.impex-fitness.com 

[email protected]

 

Summary of Contents for Iron Grip Sport IGS-09












Reviews: