Impex APEX II, Owner'S Manual

Page: 17 / 22

STEP 10 (See Diagram 10 & Cable Loop Diagram)
A.) Attach one end of the 87” Butterfly Cable (#37) to the clip on the Right Butterfly (#21). Draw
the Cable to the right open bracket on the Butterfly Pulley Bracket (#19).
B.) Attach a Pulley to the Bracket and secure it with one M10 x 1 ¾” Allen Bolt (#87), two
∅
¾”
Washers (#94), one 2 7/8” L-shaped Bracket (#98), and one M10 Aircraft Nut (#96).
C.) Draw the Cable underneath the Pulley then pull upward to the Crossed Double Floating
Pulley Bracket (#24) previously installed in Step 9. Install another Pulley.
D.) Pull the Cable around the Pulley then downward back to the Butterfly Pulley Bracket (#19).
Repeat the procedure (B) above to install another Pulley.
E.) Pull the Cable underneath the Pulley towards the Left Butterfly (#20). Attach the end of the
Cable to the clip on the Left Butterfly (#20).
DIAGRAM 10
16