Impex APEX II, Owner'S Manual

Page: 10 / 22

STEP 6 (See Diagram 6)
A.) Attach the Butterfly Base (#18) to the Front Vertical Beam (#2). Secure it with one 4 ¾”
Bracket (#27), two M10 x 3 ½” Carriage Bolts (#78),
∅
¾” Washers (#94), and M10
Aircraft Nuts (#96).
B.) Insert the Right Butterfly (#21) through the right hole on the Butterfly Base. Secure it with
one M12 x 5/8” Allen Bolt (#83) and
∅
1 ½” Washer (#73). Plug a
∅
1 ½” Round End Cap
(#63) to the end opening on the Butterfly. Repeat the same step to install the other side.
C.) Insert one Butterfly Handle (#17) through the pivot hole on the Right Butterfly (#21).
Secure it with one M12 x 5/8” Allen Bolt (#83) and
∅
1 ½” Washer (#73). Secure a M10 x
1” Allen Bolt (Half Thread) (#90) through the slotted hole on the pivot into the Handle.
Repeat the same step to install the other side.
DIAGRAM 6
9