IMPETUS iT 4500, User Manual

Page: 8 / 16

5.As shown in figure, press down the monitor along the monitor stand plate, then tighten the
screw (#944) M4*8 x (2 pcs).
6.Tighten all the screws (#948) M8*20 x (6 pcs) on both sides.
Press down the monitor as the
arrows shown making sure there
is no excessive gaps between
parts.
Minimize the gap between parts.
Tighten the screw
(#944) M4*8 x
(2pcs).
7.Folding and Unfolding:
Folding – Hold the end of the treadmill (as arrow shown ), lift and fold the base assembly (101)
up until the air pressure shaft (110) outer tube pops out and is able to support the air pressure
pole (110B).
Unfolding – Hold the treadmill and gently kick (as arrow shown B) the air pressure shaft (110)
outer tube toward you so that the air pressure shaft is gently released, and base assembly (101)
slowly lowers itself to the ground.
948
948
8