IPX Manual RB01
3.2
CONFIGURATION MEMORY
The camera has a built-in configuration memory divided into 3 segments: ‘work-
e
e’. The ‘work-space’ segment contains the
powered-up and operational. All
registers can be programmed and
ieved
comm
s issue
the us
sed and
n po
own
amera r
ers are
ed. Th
ctory
ent is
M bas
, write
tected an
ontains the default camera s
space
is available for read operations only. The ‘user-space’ is non-volatile, EEPROM
based and used to store the user defined configurations. Upon power up, the
camera firmware loads the work-space registers from either the factory-space or
user-space as determined by a ‘boot control’ register located in the configuration
memory. The ‘b
the user (refer to
Camera Configuration Section). The user can, at any time, instruct the camera to
ry-space’ or ‘user-space’.
rkspace settings only into
‘user-space’.
spac ’, ‘factory-space’ and ‘user-spac
current camera settings while the camera is
camera registers are located in this space. These
retr
o
via
w d
and
a c
d by
e
t
er. The workspace is RAM ba
cl r
up
RO
er
ed
ll
pro
gis
d c
ea
e a
‘f
-space’ segm
ettings. This
oot control’ register can be programmed by
loads its workspace with the contents of either the ‘facto
The user can instruct the camera to save the current wo
www.imperx.com
79
of
137
5/6/2005