IPX Manual RB01
CAUTION NOTE
1.
Old IPX and MDC camera shipped prior to March 1, 2005, come with
a power cable which terminates in a HIROSE plug #HR10A-10R-10P,
tail cable ending with 4 pin interface connector
and have a small pig-
for the external trigger input and strobe output. The I/O interface
connector is shown in Figure 1.7, and the corresponding pin mapping
in Table 1.5b.
1
3
2
4
Figure 1.7. I/O Cable Interface – Old Connector.
Pin
Signal
Description
1
Trigger In -
External Trigger Input
2
Trigger In +
External Trigger Input
3
Strobe Out +
Strobe Light Sync Pulse
4
Strobe Out -
Strobe Light Sync Pulse
Table 1.5b – I/O Interface Connector - Pin Mapping
www.imperx.com
27
of
137
5/6/2005
