IPX Manual RB01
IPX-4M15
mode, each line consists of 12 empty pixels (E1 – E12),
ls (R1 – R28) – Figure 2.15.
In the dual mode, each line consists of 12 empty pixels (E1 – E12),
followed by 28 masked pixels used for black (dark) reference (R1 –
R28), followed by 4 buffer pixels (B1 – B4), followed by 1024 active
data pixels – Figure 2.16. The data is sampled on the rising edge of the
clock, and the LVAL (line valid) signal is active only during the active
pixels. Each frame consists of 122.1 us vertical frame timing for single
mode (95.7 us for dual mode), followed by 10 masked dark lines RL1
– RL10, followed by 6 buffer lines (B1 – B6), followed by 2048 active
lines (L1 – L2048), and followed by 8 buffer lines (B1 – B8). During
each frame the FVAL (frame valid) signal is active only during the
active lines (L1 – L2048) – Figure 2.17.
In single
followed by 28 masked pixels used for black (dark) reference (R1 –
R28), followed by 4 buffer pixels (B1 – B4), followed by 2048 active
data pixels (D1 – D2048), followed by 4 buffer pixels (B1 – B4), and
followed by another 28 masked dark pixe
DATA
LVAL
12 empty
pixels
28 dark
pixels
2048 active
data pixels
300 ns
700 ns
51200 ns
4 buffer
pixels
100 ns
4 buffer
pixels
100 ns
28 dark
pixels
700 ns
- 0 -
E1
E12 R1
R28
B1
B4
D1
D2048
B1
B4
R1
R28
- 0 -
Figure 2.15 - Single Output Line Timing (IPX-4M15)
DATA 1
LVAL
DATA 2
D1
D2047
- 0 -
E1
E4
R1
R28
B1
B4
- 0 -
- 0 -
E1
E4
R1
R28
D2
D2048
B1
B4
- 0 -
12 empty
pixels
28 dark
pixels
2048 active
data pixels
300 ns
700 ns
25600 ns
4 buffer
pixels
100 ns
Figure 2.16 - Dual Output Line Timing (IPX-4M15)
www.imperx.com
51
of
137
5/6/2005
