Imperial DABMAN i550 CD, Operating Instructions Manual

Page: 80 / 292

80
EN
6. FIRST START-UP
Your DABMAN i550 CD is a network device, which should be integrated into your network like all such
devices.
By connecting to a home network with an internet connection, you have access to over 25,000 radio
stations. By integrating the device into a home network, you can also control it from a tablet or smartphone
via an app.
However, you can also just use your radio as a DAB+ receiver.
Information about the DAB+ reception in your region can be found on www.digitalradio.de for example.
To connect the device to the Internet, you need the following:
• An Internet connection (e.g. DSL, ideally with a flat rate).
• A router for Internet access, for wireless operation a so-called W-LAN router (Wireless LAN/WIFI).
• For WIFI integration: Your network key (WEP, WPA or WPA2)
This, like any key, is used to secure against unauthorised access and has been set up with your network. To
access a network secured in this way, the key
must be entered into the radio later on. If your network does not have a key,
the device can connect to the Internet without entering it.
NOTE!
If you are not sure whether you are using such a key in your network, just try it without entering it first! If the
device does not work afterwards, repeat the setup procedure. You should know the key then, however, If
necessary, ask the person who set up your network for help.
The WIFI password can often be found on the router’s bottom side,
unless the key has been changed manually.
Alternatively, the device can also be connected to the internet router via a LAN cable.
The radio can be controlled using both the device buttons as well as the remote control. The remote control
is the more convenient and easier way to operate the DABMAN i550 CD. For this reason, this manual mainly
explains how to set up and operate the radio using the included remote control.
Connect the radio to the supplied power adpater (chapter 4.2 Connection 17)
and establish the power supply.
During the first start-up, a setup wizard starts to guide you through the one-time setup.
During the first start-up, a setup wizard starts to guide you
through the one-time setup.
Select the answer using the navigation dial or the
‘Left’ and ‘Right’ buttons on the remote control.
In the first step, select the menu language.