Impecca IPAC16-BRB, User Manual

Page: 17 / 80

–17–
ENGLISH
ESP
AÑOL
FRANÇAIS
ENGLISH
ESP
AÑOL
–17–
FRANÇAIS
DRAINAGE PIPE SETUP
The drainage hose must be installed before using this unit. Not doing so can result in a
block in the drain and may prevent the unit from functioning normally. Condensation
buildup in humid environments will severely impact the efficiency and normal operation
of your unit.
STEP 1
: Remove the attached rubber plug found at the rear base of the unit.
STEP 2
: Using the provided screw, attach the drainage pipe clip near the drainage port.
STEP3:
Place the drainage pipe onto the drainage port and fasten with the drainage
pipe spring clip. Place the rubber stopper at the top of the pipe, securing with the pipe
hoop and clip the hose to the unit.
Drainage port
Rubber plug
Drainage port
Drainage pipe clip
Screw
Drainage port
Drainage port
Pipe hoop
Pipe hoop
Drainage pipe clip
Rubber plug