Using the Boom Stand
To use the Combo Boom as
a boom stand: Set up the
stand. Loosen the T-lock for
the second section (from the
top). Loosen the ratchet handle
that controls the angle of the
boom. Lift the upper section
of the stand straight up until
the bottom of the section is
exposed. Angle the section to
the desired position and tighten
the ratchet handle.
To extend the boom arm,
loosen the topmost T-lock, pull
the section out to the desired
length, and tighten the T-lock
securely. Be sure to tighten
the ratchet handle controlling
the angle of the boom before
adjusting the length of the
boom. Also, be sure to tighten
the T-lock used to adjust the
length of the boom before
adjusting the angle of
the boom.
