impact LS-CB6 Instructions Manual Download Page 7

Recommended Accessories

• Impact LSA-CW10 Counter Weight (10 lb.)
• Impact GT40-218CAU Gaffer Caution Tape 

(2 in. × 18 yd.)

• Impact CA-108 Swivel Umbrella Adapter
• Impact CA-107 5/8 in. Receiver to 5/8 in. Pin Adapter
• Impact SRP-124 Scissor Mount for Drop Ceilings
• Impact SC-1815 Safety Cable (18 in.)

Warnings 

• Please read and follow 

these instructions and 
keep this manual in a 
safe place.

• Handle the unit with care.

• Clean the unit with a soft, 

dry cloth.

• Keep this unit away from 

children.

• Make sure everything is 

secure before proceeding.

• Make sure the item is 

intact and that there are 
no missing parts.

• Do not exceed the 

maximum load capacity.

• Use caution when 

mounting a product at the 
maximum load capacity.

• All photos are for 

illustrative purposes only. 

Minimum Height:
Maximum Height: 
Folded Length:
Boom Length (Extended):
Weight:
 

Leg Diameter:
Maximum Load  

Capacity, Stand: 
Maximum Load With 

Boom at 60 in.:
Maximum Load With 

Boom at 75 in.: 
Air Cushioned: 
Accepts Wheels: 
Materials: 

51.9 in. (131.8 cm)
12.95 ft. (3.95 m)
45 in. (114.3 cm)
84 in. (213.3 cm)
6.6 lb. (3.0 kg) with 

no counterweight
22mm 
25 lb. (11.34 kg)  

6.5 lb. (3.0 kg) 

3.0 lb. (1.36 kg) 

No
Yes (IMCLS22) 
Aluminum

Specifications 

Summary of Contents for LS-CB6









Reviews: