impact BM255, User Manual

Page: 9 / 23

8
Chapter 5 OPERATOR’S INTERFACE
5.1 CONTROLS AND MESSAGES
A1 SAFETY GUARDS
A2 FIXING BRACKETS
A3 LEVER FOR MOULD BLOCKING
A5 COMPACTION HAMMER
A7
COUPLING LEVER
A8 CONTROL PANEL
A1 SAFETY GUARDS
Only for EEC appliances. It prevents the operator from coming in touch with the moving parts of the
appliance.
A2 FIXING BRACKETS
They allow fixing the appliance to the floor.
A3 LEVER FOR MOULD BLOCKING
It allows blocking the mould, after its positioning, on the compactor steel base.
A5 COMPACTION HAMMER
It allows the compaction of the specimen.
A7 COUPLING LEVER
It allows coupling the moving rod in the upper position when the mould must be positioned on the base of the
compactor.
A8 CONTROL PANEL
To set the number of hits according to standards. A safety switch is available on the right side.