6
DANGER
The continuous use of the machine together with other noisy appliances could cause a
high level of exposure to the noise. If the daily exposure of the operator is equal or higher
than 85 dB(A), Safety Devices as headphone are suggested to be worn.
If the daily exposure is equal or higher than 90 dB(A), the use of the Safety Device is
compulsory
.
For further information consult the standards of the country where the machine has been
installed.
Chapter 3
INSTALLATION
DANGER
Consult
2.3 DANGEROUS PARTS AND RESIDUAL RISKS before
proceeding
3.1
LIFTING
The operating instructions must be respected during:
The lifting and the storing
The first installation
The further installations
The machine is usually packed in a wooden case to be moved by a forklift.
During the lifting of the case, it is recommended to take the utmost care and to follow the lifting directions
labelled on the case. If possible, use forklift or crane and fasten the case with belts and ropes, avoid the use
of chains.
ATTENTION
The lifting of the case must be effected with great care and following the lifting directions on the
case. Pay attention to avoid impacts and turnovers.
ATTENTION
Protect the machine from the atmospheric agents. Water and humidity could oxidise it,
damaging it seriously.
3.2
UNPACKING
After removing the package, check that any parts of the machine are not damaged. In case of doubt,
DO
NOT USE THE MACHINE
and ask the manufacturer.
DANGER
The materials used for the package (plastic, polystyrene, screws, nails, wood etc.) have
to be kept far from children. They must be thrown away in a proper collection centre.
ATTENTION
Pay attention to avoid impacts and turnovers.
ATTENTION
Before throwing away the package, pay attention that any accessories, manuals,
documents, spare parts are not inside.
3.3
INSTALLATION
The machine has to be placed in an environment suitable for the aim it has been conceived for (laboratory
use). The installation must be done by skilled operator.
ALLOWED TEMPERATURE
from + 5°C to + 40°C
ALLOWED HUMIDITY
from 30% to 95%
O.S.L. MAX. HEIGHT
1000 m
GENERAL WARNINGS.
The machine must be installed so that it is free from each side. This will grant its easy maintenance.
No unauthorized people or dangerous objects must be allowed to get in the area near the appliance.
The control panel should be secured to the wall to a convenient height to allow an optimal control of the
various functions by the operator as well as a rapid intervention in case of emergency.
The appliance should be installed on a smooth and hard floor, best if made of concrete; secure the
appliance using the special hooks foreseen on the wooden pedestal. Use the provided fixing bolts and
check carefully that the trip mechanism is perfectly levelled.
Summary of Contents for BM255
Page 16: ......
Page 23: ...8 ENCLOSURE D ELECTRIC PANEL ...