STEP 5
5
ATTACH LEGS TO TABLETOP
1. Place assembled legs on tabletop. Align with holes on tabletop.
CAUTION! Do not trap leg motor cables underneath desk.
2. Attach assembled legs using 16 M4.5 20mm Wood Screws or M5 20mm
Machine Screws (Part #9).
Note: Slim Tops (3/4” width) come with Wood Screws while Select Tops (1 1/8” width)
come with Machine Screws.
STEP 6
ATTACH FEET TO LEGS
1. Attach Feet (Part #7) to Legs using 4 M8 Hex Screws (Part #5).
Ensure Feet face correct direction (short ends towards back of desk).
2. Hand turn Leveling Pads (Part #8) tightly.
Note: These pads help level desk in event of an uneven floor surface; they can
be easily re-adjusted after assembly.
1
2
Step 5 Complete
1
2
