background image

MANAGE YOUR CORDS

Invest in a cable management kit! It’s the smart way to tidy up 

all your loose or draped cables. We offer a basic kit for minimalist 

workstations, and an advanced kit for those with a few more cords 

to corral. 

Find both at: 

www.iMovR.com/cable-management-video

Symptom

Handling

After connecting the power, the desk does not raise.

Re-calibrate the desk. See instructions for  “Initial Calibration”.

Check if the connections are correct.

Please contact your supplier.

The legs rise slowly.

Check to see if legs are perpendicular (at 90 degrees) to the desk-top and 

the floor. If the legs are splayed inward or outward, the motor will not 

operate at an optimum level.

Check that the weight load on the table is not excessive.

Confirm the line voltage is 110v.

One leg moves while the other does not.

Check the drive cable connection.

Check to see if legs are perpendicular (at 90 degrees) to the desk-top and 

the floor. If the legs are splayed inward or outward, the motor will not 

operate at an optimum level.

Please contact your supplier.

Table slides down on its own.

Check that the weight load on the table is not excessive.

Please contact your supplier.

14

ADD A MONITOR ARM

For the best standing desk ergonomics, you’ll want to add 

a monitor arm to your workstation. Monitor arms keep your 

screen(s) at an ergonomic location (height, depth, and angle), 

which means less neck and eye strain and more comfort during 

your standing desk experience. iMovR offers several varieties, 

including those designed for heavy monitors and dual monitors. 

Add one to your desk system -- you’ll keep your eyes on the prize, 

ergonomically speaking. 
Visit: 

www.iMovR.com/accessories/monitor-arms.html

FIND A STANDING MAT

No standing desk system is complete without an anti-fatigue 

standing mat! If you want to boost your standing endurance, try 

one of our EcoLast Standing Mats. Made from 100% polyurethane 

material, our mats are durable, environmentally friendly, and come 

with an incredible lifetime warranty. A variety of sizes and colors 

are available to fit your workstation needs. 
Visit: 

www.iMovR.com/standing-mats.html

TROUBLESHOOTING

FINAL TOUCHES

Summary of Contents for Cascade Standing Desk

















Reviews: