3.3 Panel cutout
Lateral close mounting
n: Number of units mounted
Caution: If lateral close mounting is used for the
controller, IP66 specification will not be fulfilled.
(Fig.
3.3-1)
0.5
3.4 CT (Current transformer) external dimension
75
45
+
0
45
+0.5
0
45
+0.5
0
n x 48-3
+0.5
0
CTL-6S (for 5A, 10A, 20A)
CTL-12-S36-10L1 (for 50A)
(Fig. 3.4-1)
3.5 Mounting
Mount the controller vertically to fulfill the Dust-proof/Drip-proof specification (IP66).
Mountable panel thickness: Within 1 to 15mm
Insert the controller from the front side of the panel.
Attach the mounting brackets by the holes at the top and bottom of the case and secure the controller
in place with the screws.
(Fig.3.5-1)
Warning
As the case is made of resin, do not use excessive force while screwing in the
mounting bracket, or the case or screw type mounting bracket could be damaged.
The torque is approximately 0.12N•m.
3
