OUT1 low limit setting
• Sets the low limit value of OUT1.
Not available when OUT1 is ON/OFF action.
• Setting range: –5% to OUT1 high limit value
(Setting less than 0% is effective to DC current output type)
0%
OUT1 ON/OFF action hysteresis setting
• Sets ON/OFF action hysteresis for OUT1.
• Available only when OUT1 is ON/OFF action
• Setting range: 0.1 to 100.0 ( ), or 1 to 1000
1.0
OUT2 action mode selection
• Selects OUT2 action from air, oil and water coolings.
• Not available when the option DT is not added or when OUT2 is
ON/OFF action
• Air cooling:
, oil cooling:
, water cooling:
Air cooling
OUT2 high limit setting
• Sets the high limit value of OUT2.
• Not available when the option DT is not added or when OUT2 is
ON/OFF action
• Setting range: OUT2 low limit value to 105%
(Setting greater than 100% is effective to DC current output type)
100%
OUT2 low limit setting
• Sets the low limit value of OUT2.
• Not available when the option DT is not added or when OUT2 is
ON/OFF action
• Setting range: –5% to OUT2 high limit value
(Setting less than 0% is effective to DC current output type)
0%
Overlap band/Dead band setting
• Sets the overlap band or dead band for OUT1 and OUT2.
+ setting value: Dead band, – setting value: Overlap band
• Available only when the option DT is added
• Setting range: –100.0 to 100.0
( ), or 1 to 1000
0
OUT2 ON/OFF action hysteresis setting
• Sets ON/OFF action hysteresis for OUT2.
• Available only when the option DT is added
• Setting range: 0.1 to 100.0
( ), or 1 to 1000
1.0
A1 action selection
• Selects an action for A1.
No alarm action :
Process high alarm
:
High limit alarm :
Process low alarm
:
Low limit alarm :
High limit alarm w/standby :
H/L limits alarm :
Low limit alarm w/standby :
H/L limit range alarm:
H/L limits alarm w/standby :
No alarm action
A2 action selection
• Selects an action for A2.
• Available only when alarm A2 is added
• Action selection and default value are the same as those of A1
action selection.
No alarm action
A1 action Energized/Deenergized selection
• Selects Energized/Deenergized for A1.
• Not available if No alarm action is selected in A1 action selection
• Energized:
Deenergized:
Energized
A2 action Energized/Deenergized selection
• Selects Energized/Deenergized for A2.
• Not available if alarm A2 is not added or if No alarm action is
selected in A2 action selection
• Action selection and default value are the same as those of A1
action Energized/Deenergized selection.
Energized
A1 hysteresis setting
• Sets hysteresis for A1.
• Not available if No alarm action is selected in A1 action selection
• Setting range: 0.1 to 100.0 ( ), or 1 to 1000
1.0
A2 hysteresis setting
• Sets hysteresis for A2.
• Not available if alarm A2 is not added or if No alarm action is
selected in A2 action selection
• Setting range: 0.1 to 100.0 ( )
，
or 1 to 1000
1.0
10