3. System Setup
After the system is ready, you can set up system as follows:
1. Press the Exit button until Set up screen appear
2. Use the direction arrows on the remote control (Up, Down, buttons) or on the Photo Frame Printer to select a menu.
3. Press the Right button on the remote control or the OK button on the Photo Frame Printer to enter.
4. Press the Exit button to finish Set up
Set up Main Menu
First Submenu
Second Submenu
Third Submenu
Slide Show
Slide Interval
5 seconds
10 seconds
30 seconds
60 seconds
Note:
System ready, If you turn on the button, following image is on.
When the select mode screen is on, it starts a slide show automatically.
Exit until Setup screen appears.
13
•
Setup
