Q. When I fly, all I see is the ground
Tilt the flight camera up! (but beware that landing with a heavily tilted flight camera can be
more of a challenge).
A useful trick when setting camera angle is to take note of the position of your head while
flying. If you find yourself constantly looking up, angle the camera up. If you find yourself
constantly looking down, angle the camera down.
Q. My Vortex flips instead of taking off
Check that the correct props (CW vs. CCW) are installed in the correct locations.
Also check that the props rotate in the correct direction, and run
on each motor
that needs reversing.
Q. I updated to the latest BetaFlight x.y.z and my quad is no longer tuned
BetaFlight is a superb piece of software, updated almost daily to add new features, and is
really the ‘bleeding edge’ of flight controller code. Unfortunately, this also means that
‘stability’, or ‘backwards compatibility’ is not a priority.
The Pro-Tunes shipped with the Vortex 250 Pro were painstakingly learned using the version
of Cleanflight/Betaflight that we shipped with. We cannot guarantee that all future versions of
either of these firmware bases will keep this same fine level of tune.
From time to time we will commit to providing updates which synchronize the OSD, Flight
Controller, and the Pro-Tunes. Check the ImmersionRC website, Vortex 250 Pro page
occasionally for news on these updates. .
63
Summary of Contents for vortex 250 pro
