ImmersionRC vortex 250 pro, Instruction Manual

Page: 47 / 65

2) Attach the Vortex to a Windows PC or a Mac using a standard Micro-USB cable
(ensure that this is a full USB cable, and not a power-only cable shipped with some
products)
3) Start vortex-configurator from chrome://apps/
4) Make sure the right COM port is selected and press the
​ Flash Firmware ​ button.
5) Point to the update file (OSD_vX.X.X.X.fw) downloadable from the ​ Vortex 250 product
page
​
on the ImmersionRC website, and start the update.
If during a previous upgrade you had a problem causing the OSD to be bricked, you can still
recover from this state using the procedure below:
Upgrade procedure for bricked OSD
1) Press and hold fusion board button.
2) Plug Lipo ( while still holding the fusion board button ).
3) Release fusion board button after 2 seconds.
4) Plug to USB
5) Start vortex-configurator from chrome://apps/
6) Make sure the right COM port is selected and press the
​
Flash Firmware
​
button.
7) Point to the update file downloadable from the Vortex product page on the
ImmersionRC website, and start the update.
47