Instructions for Use and Guarantee Conditions
8
IML
-Instrumenta Mechanik Labor System GmbH
I
Parkstraße 33
I
69168 Wiesloch I
Phone +49 (0) 6222 6797-0
I
Fax +49 (0) 6222 6797-10
I
E-mail [email protected]
I
Web: www.iml.de
ENGLISH
Instruction
Pre-adjustments
Adjusting the advanced speed stage of the accumulator drill
Two speed ranges can be pre-selected on the accumulator drill with the gear selection:
- 1st gear:
low rotational speed
(400 rpm)
Used for
tree examination
(higher resolution)
- 2nd gear:
high rotational speed
(1200 rpm)
Used for
utility poles
Adjusting the sensitivity
The setting wheel for adjustment of sensitivity is installed at the rear of the
IML-RESI attachment. The stages of sensitivity are marked by the
ciphers 1
and
2
.
As long as the setting wheel is not pressed, it is in zero position!
To modify the sensitivity, move the slide to rear end position. Slightly press the setting
wheel against the casing and turn it until the bolt catches perceptibly. Now press the
wheel firmly and set the desired sensitivity by turning it. Then release the setting wheel; it
returns to zero position.
Sensitivity stages:
Stage 1:
soft wood
Stage 2:
hard wood
Setting wheel
in zero position
Catch bolt
Bolt caught
Firmly press
and turn
setting wheel
