Instructions for Use and Guarantee Conditions
12
IML
-Instrumenta Mechanik Labor System GmbH
I
Parkstraße 33
I
69168 Wiesloch I
Phone +49 (0) 6222 6797-0
I
Fax +49 (0) 6222 6797-10
I
E-mail [email protected]
I
Web: www.iml.de
ENGLISH
Instruction
Exchanging the drilling needle
Insert the new drilling needle by hand into the instrument up to the stop.
First slightly tighten the clamping screw by means of the hexagon socket screw key,
then firmly tighten it by turning it approx. 45° clockwise. Fix a new security label
if available.
Place a new wax paper strip, shut the plastic cover, choose the drilling by operation
the rotational direction switch, insert the storage battery.
It might happen, in rare cases, that the drilling needle has to be exchanged while the
drive shaft is in front position (for instance if the drilling needle is deformed or broken).
In that case, proceed as described above but previously move the drive shaft to front
position.
Insert new drilling needle
Tighten clamping screw by means
of hexagon socket screw key
Gray security label
If you have to move the recording needle in the front position - be careful -
INCREASED DANGER OF INJURY
!
CAUTION
To exchange a broken drilling needle, the recording needle will always have to be
moved in front position!
NOTE
Opening for exchange
the drilling needle with
slide at the front of the
instrument
