User Manual
SONO-MIX MINI Version 2_7
2017-05-12
Page 42
9. Savety Notes
In this documentation, text points are highlighted, which require special attention.
DANGER:
The Warning Triangle with the exclamation mark warns you against
personal injury or property damage.
Intended Use
Sensors and measuring systems of IMKO GmbH may only be used for the purpose described,
taking into account the technical data. Misuse
and use of the e
quipment other than for its
intended purpose
are not eligible.
The function and operational safety of a sensor or
measuring system can only be guaranteed if the general safety precautions, national
regulations and the special safety instructions in this operating manual are observed during
use.
The moisture sensors and measuring systems of IMKO GmbH are used to measure moisture
according to the measuring purpose and measuring range defined and defined in the technical
data. Only adherence to the instructions described in the manual is regarded as intended use.
The manual describes the connection, use and maintenance of IMKO sensors and IMKO
measuring systems. Read the manual before connecting and operating a sensor or measuring
system. The manual is part of the product and must be kept close to the sensor or measuring
system.
Impairment of safety
The sensor or the measuring system has been designed and tested in
accordance with EN 61010 safety regulations for electronic measuring
instruments and has left the factory in a safe and safe condition. If the sensor or
the measuring system can no longer be operated safely, it must be put out of
operation and secured by means of marking before further commissioning. In case of doubt,
the sensor or the measuring system must be sent to the manufacturer or his contractual
partner for repair or maintenance.
Modifications
For safety reasons, it is not permitted to carry out any modifications or
modifications to the sensor or the measuring system without the consent of the
manufacturer. The opening of the sensor or hand-held meter, adjustment and
repair work, as well as all maintenance work other than the work described in
the manual may only be carried out by a specialist authorized by IMKO. The sensor or the
measuring system must be disconnected from the power supply before installation or
maintenance work. Do not open or repair the hand-held unit and the power supply!
Hazard Warnings
Danger due to improper operation. The sensor or the measuring system may
only be operated by instructed personnel. The operating personnel must have
read and understood the operating instructions.
