User Manual
SONO-MIX MINI Version 2_7
2017-05-12
Page 34
7.1.4. Configuration of Measure Mode
In "
Probe List
" with "
Config
" and "
Measure Mode & Parameters
” the SONO probe can be adjusted to the
desired measure mode CA, CF, CS, CK, CC or CH (see Chapter
“Configuration Measure Mode
By selecting the operating mode,
the SONO probe can be set up
to different measurement modes,
e.g. for averaging values from
several single measurement
values, for performing a filtering
or performing other functions
(see chapter
"Measurement
mode configuration"
in this
manual).
Furthermore, a SONO probe can
be set to a special required
precision of the single value
measurement with "
Single
Precise Parameters".
It is about
settings, how the TDR radar
pulse is executed and evaluated
during one measurement cycle.
The next chapter describes how
this can be done.
