10 Declaration of conformity
Norgren GmbH
Postfach 15 60
D-70705 Fellbach
Stuttgarter Str. 120
D-70736 Fellbach
Tel: + 49 711 5209-0
Fax: +49 711 5209-614
www.imi-precision.com
Geschäftsführer:
Vorsitzender des
Dr. Klaus Heldmann
Aufsichtsrats:
Christian Keil
Andrew Bruce
Thomas Hey
Sitz der Gesellschaft:
46519 Alpen
Handelsregister:
47533 Kleve, HR B 7257
Steuer-Nr.: 5119/5744/0345
USt.- IdNr.: DE191308280
Bankverbindung:
Bank of America N.A.
IBAN: DE68 5001 0900 0020 6340 26
SWIFT Code: BOFADEFX
EC Declaration of Conformity
In accordance with the
Machinery Directive 2006/42/EG
Product
3/2-, 5/2-way-safety valve,
electro-pneumatic actuated
Ranges
XSz 8V (24928xxxxxxxxxxx)
XSz 10V (24929xxxxxxxxxxx)
The manufacturer hereby declares that the mentioned product conforms to all
relevant provisions of above-stated Directive and the additional applied standards
(stated below) – including those amendments valid at the time this declaration was
signed.
Machinery Directive 2006/42/EC
The following harmonized standards were applied
EN ISO 12100:2010:
EN 692:2005+A1:2009:
EN 16092-2:2021-04:
EN 16092-4:2021-04
EN ISO 13849-1:2016:
EN ISO 4414:2010:
General principles for design – Risk assessment
and risk reduction
Machine tools - Mechanical presses - Safety Machine
tools safety. Presses. Safety requirements for
mechanical presses
Machine tools safety. Presses. Safety requirements
for pneumatic presses
Safety of machinery –Safety-related parts of
control systems - Part 1: General principles for design
Pneumatic fluid power – General rules and safety
requirements for systems and their components
Notified body:
Deutsche Gesetzliche Unfallversicherung [German Social Accident Insurance],
Kreuzstraße 45, 40210 Düsseldorf / Certificate no. HSM 19019 and HSM 19021
dated 22.07.2019
-TRANSLATION-
Low voltage directive 2014/35/EC
the respective safety specifications for electrical equipment that can be operated with
a nominal voltage of 50… 1000 V AC and 75… 1500 V DC are observed.
Harmonized standard used
DIN VDE 0580: 2011
Electromagnetic units and components,
General regulations
RoHS-directive 2011/65/EC
The restrictions regarding the use of prohibited substances in accordance with
Directive 2011/65 / EC of June 8, 2011 are observed.
Further information
The CE marking on the magnets is in accordance with the following guidelines:
- 2014/35/EC Low voltage directive
- 2011/65/EC RoHS-directive
Fellbach, November 2019
Norgren GmbH
Norgren GmbH
i.V.
i. A.
Carsten Hauenschild
Marcel Junge
Manager Technical Center Fellbach
Occupational safety representative
machine directive
Low voltage directive 2014/35/EC
the respective safety specifications for electrical equipment that can be operated with
a nominal voltage of 50… 1000 V AC and 75… 1500 V DC are observed.
Harmonized standard used
DIN VDE 0580: 2011
Electromagnetic units and components,
General regulations
RoHS-directive 2011/65/EC
The restrictions regarding the use of prohibited substances in accordance with
Directive 2011/65 / EC of June 8, 2011 are observed.
Further information
The CE marking on the magnets is in accordance with the following guidelines:
- 2014/35/EC Low voltage directive
- 2011/65/EC RoHS-directive
Fellbach, November 2019
Norgren GmbH
Norgren GmbH
i.V.
i. A.
Carsten Hauenschild
Marcel Junge
Manager Technical Center Fellbach
Occupational safety representative
machine directive
Norgren GmbH
Postfach 15 60
D-70705 Fellbach
Stuttgarter Str. 120
D-70736 Fellbach
Tel: + 49 711 5209-0
Fax: +49 711 5209-614
www.imi-precision.com
Geschäftsführer:
Vorsitzender des
Dr. Klaus Heldmann
Aufsichtsrats:
Christian Keil
Andrew Bruce
Thomas Hey
Sitz der Gesellschaft:
46519 Alpen
Handelsregister:
47533 Kleve, HR B 7257
Steuer-Nr.: 5119/5744/0345
USt.- IdNr.: DE191308280
Bankverbindung:
Bank of America N.A.
IBAN: DE68 5001 0900 0020 6340 26
SWIFT Code: BOFADEFX
EC Declaration of Conformity
In accordance with the
Machinery Directive 2006/42/EG
Product
Ranges
5/2-way-safety valve,
electro-pneumatic actuated
XSz 8V (24928xxxxxxxxxxx)
XSz 10V (24929xxxxxxxxxxx)
The manufacturer hereby declares that the mentioned product conforms to all
relevant provisions of above-stated Directive and the additional applied standards
(stated below) – including those amendments valid at the time this declaration was
signed.
Machinery Directive 2006/42/EC
The following harmonized standards were applied
EN ISO 12100:2010:
EN 692:2005+A1:2009:
EN 16092-2:2021-04
:
EN 16092-4:2021-04:
EN ISO 13849-1:2016:
EN ISO 4414:2010:
General principles for design – Risk assessment
and risk reduction
Machine tools - Mechanical presses -
Safety Machine
tools safety. Presses. Safety requirements for
mechanical presses
Machine tools safety. Presses. Safety requirements
for pneumatic presses
Safety of machinery –Safety-related parts of
control systems - Part 1: General principles for design
Pneumatic fluid power – General rules and safety
requirements for systems and their components
Notified body:
Deutsche Gesetzliche Unfallversicherung [German Social Accident Insurance],
Kreuzstraße 45, 40210 Düsseldorf / Certificate no. HSM 19019 and HSM 19021
dated 22.07.2019
-TRANSLATION-
Incorporating
XSz8 - XSz50; XSz8V - XSz10V
02/22
Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifi cations given in this document. © 2014 Norgren Ltd
7503578000000006
027
