13
Operation & Service Manual
Valve islands VS18/VS26 EtherNet/IP
09/2018
Construction & Design is subject to change © 2018 Norgren GmbH
4.
Commisioning
The configuration of the EtherNet/IP valve island is done via inclusion of the device description file
(EDS file)
„002A002Bxxxx0100.EDS“. The device description file is required to be included for the
configuration of the corresponding EtherNet/IP - Controller.
Note:
xxxx =
‘2000’ -> VS18/26 with 4 Stations
`2100` -> VS18/26 with 6
– 8 Stations
`2200` -> VS18/26 with 10
– 12 Stations
`2300` -> VS18/26 with 14
– 16 Stations
`2400` -> VS18/26 with 18
– 20 Stations
Note:
All explanations in this manual
are based on Rockwell Automations “Studio 5000”.
The following steps are necessary.
4.1 EDS File Installation
The EDS file is required to configure the VS18/VS26 valve island. A symbol file is necessary to
display an icon in the engineering tool.
EDS files are provided by the module vendor and can be downloaded from:
https://www.imi-precision.com/uk/en/technical-support/software
Note:
The method of module installation strongly depends on the configuration software. Please refer to
the configuration software manual.
The following picture shows Startup image of Rockwell Automations “Logix Designer”.
