5.3.1 Programming a sequence of scenes
1) Keep button RECORD (3) pressed until its red
LED lights up.
2) Use button PAGE (10) to select if the sequence
of scenes is to be memorized on one of the
memory locations 1 to 8 (LED “1” lights up) or
9 to 16 (LED “2” lights up).
3) Select the desired number of memory location
1 to 8 with one of the buttons CHASES 1 to 8 (6).
If the LED “2” of button PAGE lights up, the num-
bers of the memory locations 9 to 16 are
selected with the buttons CHASES 1 to 8.
4) Adjust the first illumination scene with the but-
tons FIXTURE (1), the controls RED, GREEN,
BLUE (7) and MASTER (9).
It is also possible to call a memorized scene
with one button in the field SCENES and to
insert it into the sequence of scenes (
chap-
ter 5.2.2).
5) To memorize the scene, press button RECORD.
To confirm the memory procedure, all LEDs of
the control panel flash three times and the dis-
play (12) shows “01” for the first scene of the
sequence.
6) Adjust and memorize the next scene (steps
4 and 5).
7) After the desired sequence of scenes has been
memorized, switch off the memory mode. For
this purpose keep button RECORD pressed
until its LED will be extinguished.
5.3.2 Playing a sequence of scenes
1) Do not select any spotlight. If one of the blue
LEDs of the buttons FIXTURE (1) should light
up, press the corresponding button for deselect-
ing.
2) To call a sequence of scenes from the memory
locations 1 to 8, select the memory page 1 with
button PAGE (10) so that the LED “1” lights up.
To call a sequence of scenes from the memory
locations 9 to 16, select the memory page 2 with
button PAGE so that the LED “2” lights up.
3) Call the desired sequence of scenes with the
buttons CHASES (6). When selecting several
sequences of scenes, these are played one
after the other.
4) The sequence of scenes may be executed auto-
matically, by music control or manual control.
The display shows the number of the present
scene. Select the mode with button MODE / UP
(14). The mode is shown by the LEDs (13) below
the button:
AUTO
The sequence of scenes is executed
at the speed adjusted with control
SPEED (17). Adjust the fading speed
for a change of scene with control
FADE (18).
MUSIC
The sequence of scenes is executed
to the rhythm of the music picked up
via the internal microphone. Adjust
the sensitivity of the music control
with control AUDIO (16).
MANUAL The sequence of scenes can be
advanced manually with button TAP
SYNC (11).
5) To stop a sequence of scenes, press the corre-
sponding button in the field CHASES so that its
LED will be extinguished.
5.3.3 Deleting a sequence of scenes
1) Keep button RECORD (3) pressed until its red
LED lights up.
2) Use button PAGE (10) to select the memory
page on which the sequence of scenes to be
deleted has been memorized.
3) Keep button TAP SYNC (11) pressed and then
additionally press the corresponding button in
the field CHASES (6). To confirm the deleting
procedure, all LEDs of the control panel flash
three times. The buttons pressed may then be
released again.
4) To switch off the memory mode, keep button
RECORD pressed until its LED will be extin-
guished.
5.3.4 Inserting or deleting a scene
in a sequence of scenes
1) Keep button RECORD (3) pressed until its red
LED lights up.
2) Select the corresponding sequence of scenes
with the buttons PAGE (10) and CHASES (6).
3) Use buttons MODE / UP (14) and PATCH / DOWN
(15) to select the number of scene which is to be
deleted or after which a new scene is to be
inserted. The number of scene is shown on the
display (12).
4) To
delete
the selected scene, press button TAP
SYNC (11).
To
insert
a new scene, adjust the scene with the
buttons FIXTURE (1) as well as the controls
RED, GREEN, BLUE (7) and MASTER (9) or
call scenes which have been memorized before
with the buttons SCENES (2) and memorize
them with button RECORD.
16
GB
