5
、
Under building material mode, reading of the target material is displayed on LCD screen,
available range is 1.5%
～
33%. When it is lower than 1.5%, the screen shows” __ __ __”, when
it is higher than 33%, the screen shows “
￣
￣
￣
”.
6
、
Press the Hold button I during measuring
，
the symbol “HOLD” will display and hold the data,
press again to make “HOLD” disappear and exit data hold.
7
、
Press and hold the Hold button ‘I’ for 3 secs to turn off the buzzer sound during measuring.
8
、
Press and hold the power button for 3 secs to turn the MP100 off.
● LED indicators
●Blue LED——>5%-11.9%, Dry;
●Green LED——>12%-15.9%, mild moisture;
●Red LED——>16%-50%, excessive moisture.
●Accuracy checking instructions
The product has external accuracy checking function; Remove the protection cap, power on
the unit, place the 2 pins into the 2 holes at the back of the cover, just now the LCD shows a
value within 18.2% ±0.3; If beyond this range, the accuracy outside the tolerance, and
recommended to be repaired.
● Operation notes
●Replace the battery when the unit cannot be powered on or low battery indicator is on.
●Wood moisture values are related to ambient temperature humidity and wood material
density. The best way to recognize the right wood moisture content is to measure
continuously day after day to obtain the corresponding values and compare.
C a u t i o n s
● Do not drop the product or use by force.
● Do not disassemble the product to avoid failure.
● Keep the tool dry and clean.
● Do not place the product with corrosives and any gas or objects.
● Do not operate the tool in the water and dust, avoid to damage the
tool.
● Check the battery regularly to avoid deterioration.
● Remove the battery when not in use for an extended period of time.
