background image

 

3.GENERAL INFORMATION 

The following information and instructions within this manual may not cover all details or variations in the equipment, nor 
cover every problem that one may have during installation or use. If additional information is required please contact us.

 

4. SAFETY INFORMATION 

The following procedures and instructions should always be carried out in order to prevent any injuries. If the 

machinery is not used as recommended, the operator will be responsible for his/her own safety and for the safety of the 
other persons who may be involved.   

The information in this manual aims to assist the operator to understand, maintain, and operate the mixer correctly. In 

order to prevent accidents, please ensure to read, understand and follow all the precautions and warnings contained in 
this manual before installation or operating. To gain a clear under straining of your mixer, it is imperative that one must 
study this manual carefully. 

Rotating machinery and Electricity are dangerous and may cause injury if sufficient precautions are not taken prior to 

operating or servicing the mixer. Ensure that the power supply is not connected to mixer and is isolated before starting 
work to clean or service the machine. In certain troubleshooting situations it may be necessary to operate the mixer; in 
which case extreme caution must be used. Only suitably qualified personnel must service the mixer. 
 

4.1 SAFETY GUIDELINES 

Ensure sufficient precautions are observed during manually handling of the mixer, particularly when moving the mixed into 
position on installation. Ensure to adhere to the manual handling regulations. 

 

This appliance is only for commercial and not for domestic use.   

 

The mixer is not intended for use by children. 

 

Whilst the machine is in operation, do not remove any cover 

 

When mixing products that develop dust, extreme care must be taken.   

 

Exposure to dust (including flour) may be harmful to health causing rhinitis (running nose), watering eyes and possibly 

occupational asthma.   

 

If dust is a hazard, ensure appropriate PPE (personal protective equipment) is used by operators, i.e., a mask.   

 

All operators must be trained in the safe operation of the mixer and attachments. 

 

This appliance is not to be used by anyone who with a lack of knowledge. Ensure all operators have been 

appropriately trained. 

 

This appliance is not intended to be used by those sensory, physical or mental capabilities prevent them from being 

able to operate it safely. 

 

Ensure the electrical supply has been isolated and the power cord disconnected before attempting to move or service 

the mixer.   

 

Be aware of the start capacitor situated behind the rear motor cover. In normal circumstances this should discharge 

when the mixer is switched off. If in doubt discharge the capacitor following adequate safety precautions.   

 

When accessing the electrical components inside the mixer, be cautious of exposed conductors that could be 'live'.   

 

Always have your mixer and attachments regularly serviced; at least twice a year, depending on frequency of use. 

 

Ensure this manual is kept in an easily accessible place for future reference near the mixer.   

4.2. SAFETY INSTRUCTIONS     

A FULLY TRAINED AND COMPETENT PERSON MUST ONLY USE THE ATTACHMENT AND/OR MIXER.   
When manoeuvring or lifting a bowl and contents with a total weight in excess of 500kg a bowl truck must be used. 
Avoid tasks concerned with manual handling that involves a risk to health as far as reasonably possible. This 
equipment should only be stored in or transported through an environment with an ambient temperature above 5°C 
and less than 55°C.   

Note: The mixer must only be used for the purpose it was design and inline with the supplied operating instructions. 

Summary of Contents for KM50













Reviews: