iMettos KM50, Instruction Manual

Page: 5 / 12

4
When mixing ingredients care must be taken to avoid the inhalation of dust particles e.g. flour. Reference should be made
to product supplier's data sheets to ensure adequate precautions and protections are taken
The following instructions must be observed when operating the mixer
4.3. NEVER

NEVER Wear loose clothing that may become caught in the mixer whilst it is in operation.

NEVER Attempt to reach into the bowl whilst it is mixing.

NEVER Access rotating parts.

NEVER Use excessive force when operating which could affect the stability of the mixer.

NEVER Operate the mixer if parts are disassembled.

NEVER Override the safety switches fitted to the mixer.

NEVER Open the guard to stop machine.

NEVER Use the mixer in an unsafe condition.

NEVER Operate the mixer or attachment if a fault develops or the mixer is unsafe.

NEVER Attempt to repair the appliance. A qualified technician must service the machine.

NEVER Clean the mixer with scouring powder or a scouring pad.

NEVER Clean aluminium agitators in a dishwasher.

NEVER Inhale mixing ingredient dust particles.
4.4. ALWAYS

Use the mixer as intended and inline with the operating instructions.

Use the mixer in a well-lit area.

Stop the mixer before adding more ingredients.

Use the stop button to stop machine.

Disconnect the mains electricity supply before cleaning the mixer.

Clean the bowl, agitators and after use.

Clean the mixer using mild soap and water.

Clean the mixer daily.

Inspect the power cable and appliance regularly. If a fault is found do not operate.
Disconnect the mains electricity supply before cleaning the mixer.
4.5. LIABILITY
Installations and repairs which are not carried out by Authorised technicians or the use of other then original spare
parts, and any technical alterations to the machine, may affect the warranty set out in the standard conditions of sale
ATTENTION! DO NOT hose or pressure clean this appliance. It is vital to follow the cleaning procedures detailed later in
section 7 of this manual.
5.Operation and Notes:

Place the machine on the horizontal floor, keep it stable, and the environment should keep in the suitable temperature.

Check whether the power supply corresponds to that the machine require, and whether the wire are connected
properly.
Warning: The machine must be earthed properly(user’s power supply must have the earth wire.

Check the protective cover
Open it and the machine can’t started. Fix it and the machine can be started