6
Fit the rear doors in the same manner. There are two plastic blocks supplied, which if placed in
the bottom channels in front of the glass will prevent the doors from opening.
Shelving system
There are four upright channels which locate into slots provided inside the unit. The channels
have a flat tab at each end the top side is slightly longer. Place the channel vertically into the slot
provided in the top of the unit and then drop down to fit through the corresponding slot in the
bottom. Ensure that flat sides are facing inside the unit. The shelf support angles fit into the slots
in the upright channel.
They can be positioned level or slopping forward according to preference. The wire shelf is
positioned on top of the support angle and fits against the securing tab at the rear of the support
angle which prevents the shelf from sliding forward.
5.3 Operating
ATTENTION!
The operation of the device may only be carried out by personnel that have been instructed in
operation of the device
Before first use, clean the inside chamber and the tray grids with a piece of wet cloth dampened
with non-abrasive detergent. After cleaning, dry the unit thoroughly.
Take out the water pan inside the chamber. Fill water inside the water pan. The water inside is to
produce moisture to keep the inside environment wet. Fill the water as long as it does not spill
over. Monitor the water level to add the water when necessary.
Connect the unit to a suitable power supply. Rotate the thermostat clockwise to your desired
value. The yellow indicator would flush on automatically. You may also turn the illuminators on to
give your customer an impressive feeling. The inside temperature of the chamber would be
displayed clearly on the temperature display. When you turn the illuminator on, the red indicators
on the switch will light on. Observe the water level in the pan, add water when the water inside
the pan is lowered to certain positions.
When one day
’s work has been finished, shut the main switch off. Unplug the plug.
6. Transportation, Cleaning and maintenance
6.1 Transportation
In the process of transportation, the appliance should be handled carefully, preventing the
intense shaking. The packaged appliance should be stored in a well-ventilated area free of
caustic air. It cannot be placed in the outside area and should never be put upside down. Keep it
dry and dust-free. Do not expose it to direct sunlight. Avoid mechanical shocks and vibrations. If
