Imetec S0301, Instructions For Use Manual

Page: 16 / 84

15
EN
SWITCHING ON AND SELECTING THE TEMPERATURE
The following temperature levels can be set:
5: fast pre-heat temperature
4-3-2: average temperatures
1: low temperature
• Switch the foot warmer on by pressing the ON/OFF button (9). The
temperature is automatically set at level 5, so LED 5 (6) will light up on the
control device.
• To heat the foot warmer quickly, use the maximum temperature 5. You can
then set a lower temperature level, depending on the degree of heat required.
To alter the temperature, press the temperature selector (8) until the LED
(6) corresponding to the required level lights up on the control device. The
higher the number selected, the higher the temperature.
• Spread the appliance out and insert your feet in it.
AUTOMATIC SWITCH-OFF FUNCTION
• The foot warmer has an automatic switch-off system. After 3 hours of
operation, the standby display (7) comes on to indicate that the product
has switched off automatically.
• Press the ON/OFF button (9) twice to switch the appliance back on.
SWITCHING OFF
• Switch the foot warmer off after use by pressing the ON/OFF button (9).
• Disconnect the plug from the power socket.
CLEANING AND MAINTENANCE
WARNING! Always disconnect the appliance from the mains
and disconnect the control connector from the appliance
before cleaning or performing maintenance.
WARNING! DO NOT use the appliance if damp.