14
EN
NOTE: The safety interlock (8a) does not allow closing the dust bag compartment
cover (6) if the dust bag (8d) is missing or not fitted properly [Fig. F1C].
If suction does not increase after changing the dust bag (6a), replace the motor protection filter (8c).
CLEANING AND REPLACING THE MOTOR PROTECTION FILTER (8c):
NOTE:
• Replace the filter in the event it is damaged or impossible to clean.
• Replace the filter at least once a year.
• Failure to clean or replace the filter will make the manufacturer’s warranty
null and void.
• Pull the dust bag compartment lever (6a) [Fig. E1].
• remove the dust bag compartment cover (6) [Fig. E2].
• remove the motor protection filter (8c) [Fig. F2a].
• Clean the filter (8C) by shaking and brushing the dust off with care. use a soft brush to
prevent any damage.
• If the filter (8c) is clogged with dust, wash it thoroughly with water. Take care not to
damage the filter and let it dry completely.
WARNING! Let the filters dry completely after washing them
for at least 24 hours before reassembly.
• If suction has not increased after changing the dust bag (8d) and cleaning the motor
protection filter (8c), replace the filter with a new one.
• reinstall the pre-motor filter (8c), inserting it in its guides (8b) [Fig. F2C].
• Fasten the dust bag compartment cover (6) to the appliance by inserting the lower part
into its guide [Fig. E2].
• Press the upper part of the dust bag compartment cover until it snaps into place, which
indicates that the dust bag compartment lever is properly locked (6a).
STORING AND CARING FOR THE PRODUCT
When the appliance is not used, unplug it from the socket and store it in a dry and dust-free place.
TROUBLESHOOTING
PROBLEM
SOLUTION
The appliance does not
go on.
• Ensure that the plug is connected to the socket.
• Make sure that the ON/OFF switch has been pressed.
The appliance turns off dur-
ing use and does not turn
on again.
• The vacuum cleaner is equipped with a protective motor thermostat
that shuts off the appliance in the event of overheating! (caused by
obstructing objects or a clogged dust collection system).
• If triggered, switch the appliance off by pressing the ON/OFF
switch and let it cool down completely for a few hours.
• remove any dust or the obstructing object before restarting the
appliance.