16
USER GUIDE
© Copyright Imerge Ltd 2009
Page
MS5000 MediaServer
MP1000 MediaPlayer
s-VIDEO OUT
Connect the S-VIDEO output of the MediaPlayer to the
S-VIDEO input of a suitable PAL or NTSC TV to display the
TV User Interface. You may also need to switch the TV to
the relevant AUX input to display the picture.
MAINs
Connect the supplied mains lead to this connector to
provide power to the unit.
CONTROLLER
This connector should not be used.
LAN (ETHERNET)
The Ethernet port is used to connect the MediaPlayer to
a network or high speed Internet connection.
UsB
Allows the MediaPlayer to communicate with supported
USB devices.
DIGITAL OUT
The digital optical output can be used to transmit high
quality audio to a device with a digital optical input
(D/A converter, A/V amplifier etc.) using an optical fibre
cable. The advantage of using the optical output is that
it has low signal loss and is completely isolated from the
ground loop.
By connecting the coaxial jack to a digital audio
component (D/A converter, A/V amplifier etc.), digital
signals from the MediaPlayer can be transmitted directly
from the system without first being converted to
analogue.
These outputs may not be used for making a digital copy
of your media.
IR RECEIVE 2
The IR Receive connection allows remote control
information to be carried from other devices directly into
the MediaPlayer.
ANALOGUE OUT
This analogue audio output should be connected to the
input jacks of a pre-amplifier.
