10 / 15
Nemo SX - Multifunction control
module
Cat. N°: SXM0C1
6. SYSTEM ARCHITECTURES
6.1 Stand-alone system
(continued)
6.1.2 Stand-alone system with remote addressing (through a computer)
Remote addressing advantages:
-
Whole configuration (addresses and functions) can be set up through the Nemo SX Configuration software
-
Configuration software available for free
-
Automatic detection of the Nemo SX modules installed in the system (characteristics, functions, configuration...)
-
Increased settings possibilities: load shedding function
-
Increased addressing: up to 30 Modbus addresses in a system
Programming procedure:
. For Nemo SX modules which need some: mandatory through to lateral DIP-switch of each Nemo SX
modules
(see § ”Module configuration” in the
technical sheet of each device)
.
Addressing procedure:
. It is not necessary to address the Nemo SX modules. The track wheel must be left in default position “0”.
. All the addressing/configuring procedure will be done with the Configuration Software (available online for free)
. With remote addressing, the software does the automatic detection of modules installed in the system but the supervision is not possible until
the user assign the remote address and all the characteristics to each module.
Note: it is mandatory to connect the computer to the mini configuration module with a “Type B” micro USB - USB cable.
[For more details, refer to
the technical sheet dedicated to this module]
.
Technical data sheet: IDP000170EN_02
Updated: 14/02/2018
Created: 31/08/2017
