5 / 15
Nemo SX - Multifunction control
module
Cat. N°: SXM0C1
4. PREPARATION –CONNECTION
(continued)
Data connection (Nemo SX modules inter-connection)
(continued)
:
. Via specific communication rails (cat. nos SXAR18/24/36).
. Allow data transmission between the different Nemo SX modules.
This type of connection is recommended when there are several
Nemo SX modules on the same DIN row.
Implementing: with this configuration, the plastic protection cover of
the backside communication ports on the Nemo SX module must be
removed.
4. PREPARATION –CONNECTION
(continued)
Data connection (Nemo SX modules inter-connection)
(continued)
:
. Via a mix between specific communication patch cords and
communication rails in order to create a link between several rows
Two situations:
-
Individually connected with communication rails.
The communication patch cord allows to connect two rows.
-
Individually connected with communication patch cords &
communication rail.
The communication patch cords allow to connect Nemo SX
module on a row and to connect two rows.
Technical data sheet: IDP000170EN_02
Updated: 14/02/2018
Created: 31/08/2017
