© 2016 imc Meßsysteme GmbH
imc CANSAS - Getting Started, Doc. Rev. 2.0 R1 - 2016-05-24
23
CAN-Bus connectors
3 Pin configuration
3.1 CAN-Bus connectors
By default, the connector to CAN is with
.
imc CANSAS-SL modules are equipped with
.
imc µ-CANSAS modules are equipped with
or
.
imc CANSAS
fit
modules are equipped with
.
3.1.1 Standard module with DSUB-9
The following overview shows the pin configuration of the CAN-bus sockets (CAN IN and CAN OUT).
You can find a general description of the CAN-bus in the
Notes on the hardware versions
Hardware Version 1:
Valid for all devices shipped prior to mid-2003. (C12,ISO8, INK4, Bridge2, DI16,
DO16, DAC8). In these modules, there is no lWIRE-EEPROM_DATA connection; CAN IN is thus identical to
CAN OUT in terms of the pin configuration.
Hardware Version 2:
Valid for all UNI8, P8, DO16R, C8 and all -L- modules. For all other modules, please
check in the software under General/ Version/ Hardware whether this is the version. Generally it only is
for modules shipped since late-2003.
23
27
28
29
33
