5
imc CANSAS Getting Started - Doc. Version 1.9 - 05.12.2014
© 2014 imc Meßsysteme GmbH
imc CANSAS
1.1 About this manual
In the first place, please accept our thanks for choosing our product! We wish you complete success in
accomplishing your measurement goals using our imc CANSAS system.
This manual presents you with detailed description of imc CANSAS' features.
If you have any questions about our products which this manual does not answer, please contact our
imc
hotline
.
1.2 Notes / Quality Management / Customer Support
1.2.1 Quality Management
imc Meßsysteme GmbH holds DIN-EN-ISO-9001 certification since May 1995.
You can download the CE Certification, current certificates and information about the imc quality system
on our Webpage:
www.imc-berlin.com/about-imc/quality-assurance
. For further information, please
contact our
Hotline
.
1.2.2 imc Guarantee
Subject to the general terms and conditions of imc Meßsysteme GmbH.
1.2.3 ElektroG, RoHS, WEEE
The company imc Meßsysteme GmbH is registered under the following number:
WEEE Reg.- # DE 43368136
Brand: imcDevices
Category 9: Monitoring and control instruments exclusively for commercial use
Valid as of 24.11.2005
Our products fall under Category 9, "Monitoring and control instruments exclusively for commercial use"
and are thus at this time exempted from the RoHS guidelines 2002/95/EG.
_______________________________________________________
The law (ElektroG) governing electrical and electronic equipment was announced on March 23, 2005 in the German Federal Law
Gazette. This law implements two European guidelines in German jurisdiction. The guideline 2002/95/EG serves "to impose
restrictions on the use of hazardous materials in electrical and electronic devices". In English-speaking countries, it is abbreviated
as "RoHS" ("Restriction of Hazardous Substances").
The second guideline, 2002/96/EG "on waste electrical and electronics equipment" institutes mandatory acceptance of returned
used equipment and for its recycling; it is commonly referred to as WEEE guidelines ("Waste on Electric and Electronic
Equipment").
The foundation "Elektro-Altgeräte Register" in Germany is the "Manufacturers’ clearing house" in terms of the law on electric and
electronic equipment ("ElektroG"). This foundation has been appointed to execute the mandatory regulations.
6
6
