CAN-Bus connectors
23
imc CANSAS Getting Started - Doc. Version 1.9 - 05.12.2014
© 2014 imc Meßsysteme GmbH
Pin configuration and power supply
3.1 CAN-Bus connectors
By default, the connector to CAN is with
DSUB-9
.
imc CANSAS-SL modules are equipped with
LEMO connectors
.
imc µ-CANSAS modules use
Autosport
connectors.
3.1.1 Standard module with DSUB-9 CAN Bus connector
Below is shown the pin configuration of the CAN-bus plug/socket set (CAN IN and CAN OUT).
Notes on the hardware versions
Hardware Version 1:
Valid for all devices shipped prior to mid-2003. (C12,ISO8, INK4, Bridge2, DI16,
DO16, DAC8). In these modules, there is no lWIRE-EEPROM_DATA connection; CAN IN is thus identical to
CAN OUT in terms of the pin configuration.
Hardware Version 2:
Valid for all UNI8, P8, DO16R, C8 and all -L- modules. For all other modules, please
check in the software under General/ Version/ Hardware whether this is the version. Generally it only is
for modules shipped since late-2003.
23
26
27
