20
Advertise FlowC
and
Force FlowCtrl
This is the
Flow Control
feature.
•
If using Flow Control functionality on any port, enable Global Flow
Control. Then, configure each port individually.
•
If using Auto-Negotiation and Flow Control: set
Advertise FlowC
to
Advertise Flow
and set
Force FlowCtrl
to
Flow Auto
.
•
Set
Advertise FlowC
to
No Flow
to disable Flow Control on a given
port.
•
If using Flow Control and Force Mode on a given port, set
Advertise
FlowC
to
Advertise Flow
and set
Force FlowCtrl
to
Frc FlowCt.
Unit FlowControl
This enables/disables Flow Control functionality on the
unit and must enabled for Flow Control to function on any port.
VLAN and Transparency Mode Configuration
Enable
Transparency Mode
when using more than 12 VLAN IDs and/or
having a mixture of Tagged VLAN and Untagged traffic on the iMcV-
FiberLinX. Transparency Mode will not function in
Basic Mode
, which is
hardware configurable via DIP switch setting.
NOTE
All ports, except the EXT MGMT port, feature Flow Control in FDX and Back
Pressure Flow control in HDX. The TX EXT MGMT port does not include Back
Pressure Flow Control in HDX because this port also functions as a serial port.
Figure K: Transparency Mode
Summary of Contents for iMcV-FiberLinX
Page 1: ...iMcV FiberLinX Operation Manual ...
Page 2: ...Notes ...
