28
APPENDIX D: ELECTROSTATIC
DISCHARGE PRECAUTIONS
Electrostatic discharge (ESD) can damage to add-in modules. Always
observe the following precautions when installing or handling an add-in
module or any board assembly.
1) Do not remove unit from its protective packaging until ready to
install it.
2) Wear an ESD wrist grounding strap before handling any module or
component. If without a wrist strap, maintain grounded contact
with the system unit throughout any procedure requiring ESD pro-
tection.
3) Hold boards by the edges only; do not touch the electronic compo-
nents or gold connectors.
4) After removal, always place the boards on a grounded, static free
surface, ESD pad or in a proper ESD bag. Do not slide the board
over any surface.
Summary of Contents for iMcV-FiberLinX
Page 1: ...iMcV FiberLinX Operation Manual ...
Page 2: ...Notes ...
