47
RJ-45 Data Port Pinout
The following table lists the pin
configuration for the RJ-45 Data connector.
Pin
Signal Name
1000M
Signal Direction
10/100M
1
TXD1+ Out*
2
TXD1- Out*
3
RXD2+ In*
4
D3+
5
D3-
6
RXD2- In*
7
D4+
8
D4-
*NOTE
The MDI/MDIX function will automatically adjust the direction of these signals to match the
connected unit when running 10/100Base-T. 1000Base-T will use all 4 pairs in full duplex
mode.
RS-232 Serial Console Port
The IE-MultiWay includes an RS-232 Mini Jack for the Console port to allow the end
user to launch a serial session and access a list of commands. The serial port on the
computer/terminal should be set for: 38.4K baud, 8 data bits, 1 stop bit, no parity, no
flow control. The
F2
key functions as a Delete key on VT-100 emulators.
The following table lists the pin configuration for the RS-232 3-pin Mini Jack mating
connector for the console serial port.
Pin
DB9-F Pin#
Signal Name
Direction
Tip 2 Transmit
Out
of
Unit
Ring 3 Receive
In
to
Unit
Sleeve 5
Return Return
Pin 1
