24
OAM AH passive/active is available on the fiber SFP ports and TX ports
•
Supports Discovery functions on the SFP ports.
•
Supports reporting OAM Flag Events (Link Fault, Critical Event, and Dying Gasp)
•
Supports Loopback
Viewing SFP Statistics (sfpstats)
To view SFP statistics on the IE-MultiWay, enter sfpstats. This will open a screen
displaying SFP information, including vendor, serial number, bit rate and other
options.
Pressing the
Space Bar
will refresh the data on the screen.
Unit
Advertise FlowC
and
Force FlowCtrl
- This is the FlowControl feature.
•
When using FlowControl functionality on any port, enable Global FlowControl.
Then, configure each port individually.
•
When using Auto Negotiation and FlowControl, set Advertise FlowC to Advertise
Flow and set Force FlowCtrl to Flow Auto.
•
Set Advertise FlowC to No Flow to disable FlowControl on a given port.
•
When using FlowControl and Force Mode on a given port, set Advertise FlowC
to Advertise Flow and set Force FlowCtrl to Frc FlowCt.
Unit FlowControl
This
enables/disables
FlowControl functionality on the unit and
must be enabled for FlowControl to function on any port.
