imagistics im6530, Operating Manual

Page: 159 / 184

1
2
3
4
5
6
7
8
9
10
11
12
7-21
5. ADDING STAPLES (OPTIONAL)
When the staple cartridge runs out of staples, if the optional finisher is installed, the following message
appears:
Set staple cartridge
Add staples to the cartridge according to the procedure below.
2 Lower the blue lever in the stapler and slide out
the staple cartridge.
- The stapler unit has moved to its specified position.
- Do not move the stapler unit while performing the above
procedure, or it will be broken.
3 Remove the empty staple case upward from the
staple cartridge.
4
Push in a new staple case into the staple cartridge
completely inside until a click is heard.
- Do not remove the seal holding the staples until the staple
case is set in the cartridge.
Finisher (9905, 9948)
1 Open the front cover of the finisher.
07-GRAPHICSYMBOLS.P65 5/16/03, 11:52 AM 21