4.4 Interrupting a Copy Job
4
4-15
Usef
ul Op
era
tions
Chapter 4
✎
Additional Information
If the [Interrupt] key is not pressed after the inter-
rupting copy job is finished, the indicator on the
[Interrupt] key goes off and the interrupted copy
job automatically continues printing after the
length of time specified for the “Panel Reset Tim-
er” function has passed (or after 1 minute if the
function is set to “No”). For details on the “Panel
Reset Timer” function, refer to “Panel Reset Tim-
er” on page 2-17 of the User’s Guide.
If optional finisher 9997 is installed, and the inter-
rupted job is fed out to the secondary paper out-
put tray or job separator CM3500010, the
interrupted job automatically continues printing
after the interrupting copy job is finished. For de-
tails on feeding copies to the secondary paper
output tray or job separator CM3500010, refer to
“Setting the “Priority Output Tray” Function” on
page 10-27 of the User’s Guide.
TSS2_Enlarge_E.book Page 15 Thursday, June 3, 2004 10:51 AM
