2
2.1 Paper Settings
2-4
Pape
r Set
ti
ngs
Chapter 2
5
Touch
,
, and
to select the
length of side Y for the paper that is loaded
(between 3-9/16 and 12-1/4 inches). (As an
example, the following screen shows a
specified setting of 11-3/4 inches.)
❍
Touch
until the cursor moves below
the value that you wish to change.
After specifying the paper size setting, con-
tinue with step 8.
✎
Additional Information
If custom paper sizes have been stored, in-
stead of performing steps 4 and 5, a stored pa-
per size setting can be selected by
pressing
or .
For details on storing custom paper sizes, refer
to “To store a non-standard (custom) paper
size for the 1st drawer” on page 2-7.
TSS2_Enlarge_E.book Page 4 Thursday, June 3, 2004 10:51 AM
