Imagine Videotek VTM-2400 Installation And Operation Manual Download Page 23

Page: 23 / 148

VTM-2400 Installation and Operation Handbook

Section 2

♦

Installation

This section provides information about inspecting, installing, and configuring the VTM-2400.

Inspecting the Shipment

Before installing the VTM-2400, inspect the box and the contents. Report any damage to the
shipper and telephone the Imagine Communications Customer Service Department for
service and support (see “Service and Support” on page 4).

NOTE

: Refer to the enclosed packing sheet for the latest list of items that are supplied with the

unit.

The box contains the following:



One VTM-2400



One

VTM-2400 Installation and Operation Handbook

on CD



One 75Ω terminator



One detachable power cord



One breakout connector (for LTC/GPI)



If the audio option has been purchased, one additional audio breakout board is
supplied

Save the box and packing material for any future shipping requirements.

Summary of Contents for Videotek VTM-2400





















































































































































Search results

Summary of Contents for Videotek VTM-2400

Reviews:

Related manuals for Videotek VTM-2400

Brands by name

Popular brands

Imagine Videotek VTM-2400, Installation And Operation Manual

Search results

Summary of Contents for Videotek VTM-2400

Reviews:

Related manuals for Videotek VTM-2400

Brands by name

Popular brands