Global Setup Menu Functions
62
VTM-2400 Installation and Operation Handbook
OFF disables the screen saver. When the screen saver is activated, press any button to turn
the display back on.
Output Level
The Output Level submenu is used to determine the monitor output level. The default
monitor output level is 1V p-p. The other output level selection is 0.7V p-p.
Time Code
Time Code is used to enable and place the Time Code on the right side of the picture. The
Time Code Input to be displayed is set in Time Code Input on page 67. Time Code menu
selections are:
Enable: Turns the time code on or off.
LTC/DVITC: Enables the display of both LTC and DVITC time code simultaneously.
Position: The Time Code can be displayed on the Top-right, Middle-right, or Bottom-
right side of the picture.
Communications Setup
The Communications Setup menu is used to configure the communication between the VTM-
2400 and any peripheral hardware and Software connected to the unit.
RCU Port
The RCU Port submenu controls the termination for the Remote Port on the back of the VTM-
2400.
Termination
One RCU-2400 connects to multiple VTM-2400 instruments using a multidrop straight through
wire with RJ-11 connectors (not a standard telephone wire) that connect to the REMOTE
ports on the back of the VTMs and to the TO MAIN UNIT connector on the back of the RCU.
All VTMs must have unique unit IDs, as described in Unit ID on page 64. The REMOTE port
must be terminated on the last VTM-2400 using this menu.
IP Configuration
The IP CONFIGURATION menu is used to configure the VTM-2400 for Ethernet communication.
The Ethernet interface provides a high-speed communication link to the VFlash application
over standard LAN and Internet networks. The interface conforms to industry Ethernet
standards:
Connection via a standard RJ45 socket
Automatic detection and switching between 10BaseT and 100BaseT
