HOMS
+
OP
+
and OHDS
+
OP
+
Installation and Operation Manual
29
Chapter 3: Operation
OHDS
+
OP
+
Table 3-5
and
Table 3-6 on page 30
list the available OHDS
+
OP
+
parameter options (four-channel and eight-channel, respectively).You
must use CCS-enabled software or control panels to access the
parameters (there are no card-edge controls on this product). Using
CCS, you can also view the current firmware and hardware versions of
the module. Values with an asterisk indicate the default setting. [RO]
indicates the parameter is read-only.
.
Table 3-5.
OHDS
+
OP
+
Parameters (Four-Channel L8 and U8 Versions)
Parameter Name
Function
Options
Ch-x Reclock Mode
Sets the data rate for inputs 1 to 4
• Auto*
• 143
• 177
• 270
• 360
• 540
• HD
• Bypass
Ch-x Locked Rate [RO]
Displays the data rate for inputs
1 to 4
• Unknown
• 143
• 177
• 270
• 360
• 540
• HD
Ch-x ASI Mode
Enables DVB-ASI locking in the Auto mode for
inputs 1 to 4
• Disable
• Enable*
Ch-x Laser Present [RO]
Detects the presence of signals at inputs 1 to 4
• Not present
• Present
