HOMS
+
OP
+
and OHDS
+
OP
+
Installation and Operation Manual
13
Chapter 2: Installation
Unpacking the Module
Preparing the Product for Installation
Before you install HOMS
+
OP
+
or OHDS
+
OP
+
modules, perform the
following:
•
Check the equipment for any visible damage that may have
occurred during transit.
•
Confirm receipt of all items on the packing list. See
“Checking the
Packing List”
for more information.
•
Remove the anti-static shipping pouch, if present, and all other
packaging material.
•
Retain the original packaging materials for possible re-use.
See
“Unpacking/Shipping Information” on page vii
for information
about returning a product for servicing. Contact your Customer Service
representative if parts are missing or damaged.
Checking the Packing List
Setting Jumpers
The HOMS
+
OP
+
module does not use any card-edge jumpers or
controls.The OHDS
+
OP
+
module has a
Local/Remote
jumper
position, but the module is shipped without a jumper cap, as this setting
is for future use.
Table 2-2.
OHDS
+
OP
+
Packing List
Ordered Product
Content Description
HOMS
+
OP
+
or
OHDS
+
OP
+
package
• One OHDS
+
OP
+
or HOMS
+
OP
+
front
module
• One standard double-slot back connector
• One
HOMS
+
OP
+
and OHDS
+
OP
+
Installation and Operation Manual
